Home >

Milpro® milk claws for more demanding breeders

Milpro® milk claws are light, high-capacity claws specially conceived to suit any milking requirements. 13 mm milk inlet nipples is able fit most udders, even though 15mm milk inlet nipples are recommended in particular cases and for high lactation.

The arrangement of such nipples is vital for a fast milk flow away. In this last case, special Milpro® claws have been designed for side or rear milking. Offering exclusive advantages such as: high milking yields, turbulence dramatically reduced, excellent milking vacuum.

The Milkline® 450 milk claw with “FC” patented system for the milkflow control.

The internal deflector distributes the milk along the claw walls, thus dramatically reducing both turbulence and milk flow back. Evacuation speed is highly increased by the central discharge.
The upper clawpiece is made out of stainless steel with milk nipples suitable for both traditional and rear milking. We also provide the “Max Flow” version equipped with ø15 nipples.
The central bump protection gasket and the outstanding quality of materials make “Milpro® 450FC” a most reliable and unique claw.

The upper clawpiece, provided with an innerpositioned patented deflector, located right in front of the liners’ nipples prevents the milk flow, incoming from each udder quarter, from falling directly into the bowl. In so doing, the milk is forced to flow along the claw walls thus avoiding the typical large-size claw fluctuations.
The very shape of the deflector, along with its single-quarter separating walls, keeps the milk, incoming from the liners, from reaching the bowl with its usual turbulence. Moreover, any “spray effect” risks between each teat is avoided.
The teat-cup central outlet guarantees a high discharge speed.
For better udder health.
Ideal weight and size.
Technical data:

Real capacity: 350 cc / 450 cc
Weight: 520 gr.
Milk inlet tubes: 13x10 - 15x13 mm
Air inlet: 35°
Pulsation nipple: 7x10 mm
Milk outlet tubes: 20x16 mm
Main body: inox



WITH VALVE/NIPPLES 13x10
TRADITIONAL MILKING REAR
MILKING WITHOUT VALVE/NIPPLES 13x10
TRADITIONAL MILKING REAR-MILKING
WITH VALVE/NIPPLES 15x13
TRADITIONAL MILKING REAR
MILKING WITHOUT VALVE/NIPPLES 15x13
TRADITIONAL MILKING REAR-MILKING


Terms of Use | Privacy | follow us on:     

Milkline® Srl | P.IVA 01058090331 | REA 124388  
Via Mattei, 4 - 29027 Loc. Gariga di Podenzano (PC) - Italy | Tel. +39 0523 524245 | Fax +39 0523 524242